Description This double-sided plate surface is etched to give the surface a unique square and honeycomb touch and pattern transfer to prints, instead of the usual textured PEI, fits the model better, increases viscosity, does not warp during printing, is very durable and resistant to high temperatures. Double-sided textured etching plate design Excellent first-layer adhesion – no more warping or lifting High temperature resistance up to 200° C Effortless print removal – just bend the spring steel and pop off your prints. Double sided versatility – choose from Honeycomb, Houndstooth, Cube or Carbon Fiber patterns for the perfect finish. 【Note】 We recommend different filaments and their corresponding suggested temperatures for users: TPU:30-35°C; PLA:40-65°C; PETG: 50-80°C; ABS 80-120°C; ASA:80-120°C. Users can adjust according to their actual printing needs. Parameter Suggestion: After leveling the platform, adjust the distance between the nozzle and the first layer of the hot bed to 0.1~0.2mm. It is recommended that the first layer of the model slice be set to 0.2mm.First layer speed is recommended 10~50mm/s. Print ABS, PETG class close blowing fan at first 3 floors. Close the blowing fan at the first floor when you print PLA. Depending on the recommended parameters for your consumables, it is recommended that the nozzle temperature of the first layer be 10 ° C higher than that of the other layers. Popular sizes are available: 184*184mm, 257*257mm, 355*346.5mm, 235*235mm, 310*315mm, 370*370mm and more
